In the grinding process, the temperature reached by the workpiece is a decisive factor, since most of the energy required is converted into heat, and the consequences of thermal damage include phase changes and residual stresses. Hence the importance of knowing the heat distribution along the cutting process, in order to be able to accurately predict local thermal damage and thus be able to establish boundary conditions to avoid it. In this process, the appropriate use of coolants and lubricants plays a key role in achieving favourable cooling and lubrication, while generating efficient material removal and effective protection against corrosion. Nowadays, in addition to the cost of these materials (coolants and lubricants), other factors such as fluid disposal, safety measures or recycling, must also be taken into consideration, being nowadays mandatory the use of filtering equipment, which is often expensive and takes up considerable space in the plant.
In order to contribute to the improvement of this process, CEIT has an X-Ray Diffractometer for the measurement of crystallographic textures and residual stresses, the latter being one of the main consequences of thermal damage, as mentioned above. This equipment is used both for the identification and quantification of phases and for the measurement of residual stresses of crystallographic textures and phase analysis in thin films by means of a flush angle in many types of materials (metals, ceramics) and thin films. In CEIT, it has been used in most of the projects of the Materials and Manufacturing Division, as well as in the Monitoring Group of the Transport and Energy Division, allowing them: to measure the amount of austenite retained in hardened steels, to identify the crystallographic phases present in a material and their quantification from the intensity of the peaks, both in bulk materials and in thin films, to measure the surface residual stresses and to measure the distribution of crystalline orientations of materials and thin films.
In turn, the UPV/EHU has a research cell for data analysis 4.0 for grinding, which allows massive data collection and efficiency analysis of grinding applications, including new generation grinding wheels, new lubrication and cooling strategies, etc. This is possible thanks to the total sensorisation of a high-performance planer grinding machine and a high-speed cylindrical grinding machine, as well as the integration of a numerical calculation software for the study and simulation of contact conditions. The main services offered by this asset are: testing and analysis of grinding results using new application-oriented grinding wheel formulations, analysis of results in efficient and ecological lubrication systems for grinding, training and proposals for improving apps through data analysis (Machine Learning, Deep Learning), and feasibility studies, among others.
Ensuring component integrity is a critical aspect of grinding. In this sense, TEKNIKER, offers Basque industrial SMEs its Geometric and Material Characterisation Laboratory, which will provide crucial information for determining the optimum process parameters that guarantee the integrity of the components. Thus, this laboratory allows microstructural modification by means of metallographic characterisation, compositional characterisation at the surface, depth and interior, characterisation of crystallographic phases and characterisation of residual stresses. Among the services offered by the asset are: microstructural characterisation of components, compensation of volumetric errors, component life tests, geometric verification of ground parts and training of specialists in this regard.
In addition, the previously mentioned CEIT, also has a System for determining mechanical properties and microstructure by means of non-destructive measurements of magnetic properties. This consists of a non-destructive test-based control system, useful to obtain information of the microstructure and the mechanical properties of the steels or to detect the defects in production, as they can be the variations of superficial hardness, the burns caused by rectification, the residual tensions or the hardened layer, through measures of magnetic emission such as the one of Barkhausen (EMB).
It should be also noted that this system can be used to carry out both manual or automatic measurements by using a robot thanks to various couplings developed.
These solutions show how the BDIH’s Intelligent and Connected Machines node allows Basque companies to incorporate new models, concepts and techniques in the way they produce their parts and products with the aim of providing added value in a particularly critical process such as digital grinding.
Get in touch with the BDIH to find out how we can bring your company closer to the solutions that interest you most.
The "Zero Defect Manufacturing" Cell is one of the assets incorporated into the BDIH at the...Read moreShare
Mondragon Assembly is a company located in Guipúzcoa, which has more than 40 years of experience...Read moreShare
October will be Flexible Robotics Month at the Basque Digital Innovation Hub. During the next few...Read moreShare
Mondragon Assembly is a company located in Guipuzcoa, with more than 40 years of experience in the...
Alcorta Forging Group is a company located in Elgoibar (Guipuzcoa), with over a 100 years of...
For SMEs, for diversifying markets, internships abroad, international tenders, non-reimbursable subsidies to consolidate exports, subsidies for deployments or specific training in internationalisation.You’re interested, right?